Garage Door Repair Bellevue
Our Garage Door Repair Bellevue Company is the best in Garage Door Repair, Replacement and Installation. We are the best garage door Repair company in the whole of Bellevue region area. Call Garage Door Repair Bellevue and Save!
Basic Tips in Bellevue Garage Door Repair
A garage door Opener is always a needed convenience and eases a lot of work, until it gets faulty or breaks down.
While it may seem very technical and safe to have a garage door opener expert help you out when the need arises, there are basic steps anyone can try out to make a quick fix.
If you live in Bellevue and need a reliable Garage Door Repair Company, we offer the best Garage Door Repair Services in Bellevue.
Garage Door Repair Tips In Bellevue
If the remote works but the wall switch doesn’t work:
Then you can replace the wall switch or wires. You can be sure the switch/wires are okay or bad by first unscrewing the switch from the wall and touching the two wires together. If the opener runs, you have a bad switch, and if doesn’t then the wires are bad. for more info call Garage Door Repair Bellevue
If the wall switch works but the remote does not:
then consider replacing batteries or buying a new remote or receiver. When this happens, please first check with the batteries to be sure. If you can’t get your garage door opener model, then try a universal remote or get a new receiver installed. A receiver substitutes the radio frequency the opener uses with its own and an added advantage of a new receiver is that it will spontaneously update older openers to the new rolling code technology, which stops other people from stealing your code. There are various quality and durable remote models and make that fit all and if thinking of replacement – simply contact Garage Door Repair Bellevue to provide you the best options here in Bellevue.
If there is power to the outlet, but there’s no sound or lights when you push the wall switch and remotes:
then you possibly have a bad circuit board that needs replacement. Replacing a circuit board seems technical but can be really quite easy and may take not more than 10 minutes to fix.
Sometimes, every other stuff may be working fine except the lights:
this calls for light socket replacement and if the bulbs are good but don’t light up, you probably have a bad light socket. You have to remove the circuit board first to be able to replace the socket. And be certain to use a bulb of correct wattage.
If the opener delivers a grinding noise but doesn’t move:
then consider replacing the main gear drive as it probably has gone bad. For recognition – the main drive gear is the plastic gear that comes in direct contact with the worm drive gear on the motor and is the most common component to fail on openers.
Always put a check to the chain tension:
Majority of chain drive openers’ advice that you tighten the chain so there’s about 1/4 inches to 1/2 inches of slack from the rail to the chain – refer to your manual. Over-compressing the chain may put excess wear and tear on the shaft and gears and too little compression/tightening could cause the chain to skip off the sprocket and fall down on your car.
If any of the simple techniques and troubleshooting approach above seems too much for you to handle or try, then contact us today at (206) 400-7319 as your number one Bellevue Garage Door Repair.